BMTFK - HIDC IODIDE, 07410

  • MSDS: BMTFK
  • Manufacturer: EXITON CHEMICAL CO INC
  • Product Name: HIDC IODIDE, 07410
  • National Stock Number: 6810-00N027077
Product Identification

Product ID:HIDC IODIDE, 07410
MSDS Date:08/05/1991
FSC:6810
NIIN:00N027077
MSDS Number: BMTFK

Responsible Party
EXITON CHEMICAL CO INC
400 LINDEN AVE
DAYTON, OH 45431
US

Emergency Phone: 513-252-2989

Info Phone: 513-252-2989

Preparer: LARRY KNAAK

Cage: IO222

Contractor
EXITON CHEMICAL CO INC
31126 DAYTON, OH 45431 US

Telephone: 513-252-2989

Cage: IO222

Ingredients

HIDC IODIDE

CAS: 36536-22-8

Fraction By Weight: 100%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: LOW HAZARD FOR USUAL INDUSTRIAL
HANDLING. SKIN: LOW HAZARD FOR USUAL INDUSTRIAL HANDLING. EYE: NO
SPECIFIC HAZARD KNOWN. CONTACT MAY CAUSE TRANSIENT IRRITATION.
INGEST: EXPECTED TO BE A LOW ING ESTION HAZARD.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARD.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR. SKIN: WASH AFTER EACH CONTACT.
EYE: IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15
MIN AND GET MEDICAL ATTENTION IF SYMPTOMS ARE PRESENT. INGEST:
DRINK 1-2 GLA SSES OF WATER. SEEK MEDICAL ATTENTION.

Fire Fighting

Extinguishing Media:WATER SPRAY; DRY CHEMICAL; CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS.

Accidental Release

Spill Release Procedures:SWEEP UP MATERIAL AND PACKAGE FOR SAFE FEED TO
AN INCINERATOR. DISPOSE BY INCINERATION OR CONTRACT WITH LICENSED
CHEMICAL WASTE DISPOSAL AGENCY. FOLLOW ALL FEDERAL, STATE AND LOCAL
LAWS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP FROM CONTACT WITH OXIDIZING
MATERIALS. IN ACCORDANCE WITH GOOD INDUSTRIAL PRACTICE, HANDLE WITH
CARE AND AVOID UNNECESSARY PERSONAL CONTACT.
Other Precautions:AVOID CNTCT W/EYES & PRLND/RPTD SKIN CNTCT. AVOID
CONTINUOUS/REPETITIVE BRTHG OF DUST. USE ONLY WITH ADEQ VENT. FOR
LAB USE BY TECHNICALLY QUALIFIED INDIVIDUAL ONLY. KEEP CNTNRS
TIGHTLY CLSD WHEN NOT IN USE AND DURING TRANSPORT.

Exposure Controls

Respiratory Protection:A NIOSH/MSHA APPROVED DUST RESPIRATOR SHOULD BE
WORN, IF NEEDED.
Ventilation:GOOD GENERAL ROOM VENTILATION IS RECOMMENDED. LOCAL EXHAUST
MAY BE NEEDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:511F,266C
Vapor Pres:NIL
Solubility in Water:PARTIALLY SOLUBLE
Appearance and Odor:BLUE GREEN CRYSTALS, NO ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:COMBUSTION WILL PRODUCE CO2 & PROBABLY
CO. NOX AND HYDROGEN IODIDE WILL ALSO BE PRESENT.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.